Rectify the Issue of HP Printer Not Recognizing Cartridges

 

Have you become tired of looking for solutions to fix the issue of an HP printer not recognizing the cartridge? Have you tried out all possible methods but couldn’t rectify the issue? If yes, there is no need to worry! You have come to the right destination where the solution exists. In the article, we will introduce you to some quick and easy methods to fix the problem of an HP printer not detecting the cartridges. Moreover, we will let you know the causes of the issue. Let’s get started and learn how to rectify the issue.

Why is Your HP Printer Not Recognizing the Cartridges?

The error can occur on an HP printer when there is a technical issue with your printer or cartridges. We have mentioned several common causes for the occurrence of the error. Read below.

·         When you use a third-party cartridge on your HP printer, you may face this error on your HP printer.

·         You need to check the ink level as the insufficient ink in the cartridges will cause the issue to appear on your HP printer.

·         If the printhead gets clogged, the issue is likely to occur on your printer.

Note: We have discussed the main reasons behind the issue of an HP printer not recognizing the cartridges. Knowing the causes will help you fix the error quickly. Below are several methods for you. Take a glance at these.

Methods to Fix an HP Printer Not Recognizing Ink Cartridges

Method 1

When you have not correctly removed the protective tape around the cartridges, you may face the issue. A printer detects a cartridge when it is correctly installed. Make sure that you have installed the cartridges properly. Once cartridges are installed correctly, the error message will disappear.

Method 2

To get rid of the issue of your HP printer not recognizing the ink cartridges, ensure that the communication between both printer and cartridges is established properly. The dirty contact area of a cartridge is one of the most common reasons behind this issue. Keep the contacts clean so that your printer may detect them. Check if the cartridges are not damaged. If you see any cartridge defective, you need to replace it with a new one. Doing the process above will put the problem to an end.

Method 3

The improper installation of ink cartridges may irritate your printing experience and cause the issue of your HP printer not recognizing the ink cartridges. To fix the annoying problem, you first need to open the printer cover and take out the cartridges. Go through the process of reinstalling the cartridges. While installing the cartridges, you need to make sure that you install cartridges in the right slot. When cartridges are installed in the wrong slot, the error message will show on your HP printer. Reinstalling the cartridges in the right slot will quickly fix the problem.

Method 4

When one has not correctly clicked the ink cartridges into the right slot, the appearance of the error code is common. To properly click the cartridges, you first need to open the printer cover, take the cartridges out of the printer. Reinstall the cartridges, but make sure to click them appropriately. After that, you now need to close the printer cover. Try printing a test page to see if the issue is gone.

Note: By following the methods given above, one may fix the problem of an HP printer not recognizing the cartridges. Avoid taking risks if you are not aware of the printer and its parts. Contact an HP printer expert for assistance.

Conclusion

HP printers are trustworthy, but they may sometimes annoy a user. The article introduces the methods to fix the issue of an HP printer not recognizing the cartridges. We hope you find the solutions great.

James Smith and I’m a Printer Operator for 8 years. I live in the USA Though many companies manufacture printers, in my experience, HP printers are the best. Visit the website 123.hp.com/setup

 

SOURCE: Rectify the Issue of HP Printer Not Recognizing Cartridges

 

Fix HP Printer Error Code E9

 

HP is a reputed printer manufacturer that manufactures top-quality printers. People love to choose HP printers rather than any other printers. HP printers fulfill all the printing needs of their users, but the thing that causes a nuisance to HP printer users is the emergence of an error code. One of the most annoying error codes on HP printers is E9. In this article, we will explain the ways to sort out the HP printer error code E9. With the help of the methods given in the article, one can quickly get rid of the error. Let’s take a look at the procedure to fix the error code E9 on an HP printer.

When Does the Error Code E9 Occur on an HP Printer?

Error codes are common on any printer. The occurrence of an error code indicates that there is something wrong with your printer. An error code is written in a specific language that only a printer expert can understand well. If your printer is displaying an error code, you need to understand what it means and then try to fix it. The causes for the error code E9 have been mentioned below:

·         The error code E9 may occur on your HP printer if any foreign object is lying inside the printer.

·         The occurrence of the error code E9 is common when any hardware issue exists on your HP printer.

·         The issue with ink cartridges may also lead to the error code E9.

Note: We have described the causes of the error code E9 above. By understanding the causes, you will be able to resolve the error code easily. We will let you know about the solutions to eliminate the error code E9 below.

Solutions to Rectify the Error Code E9 on HP Printers

Below is the detailed procedure to help you resolve the HP printer error code E9. Let’s take a look at the solutions.

Solution 1

To sort out the error code E9 on your HP printer, follow the step-by-step procedure:

1.      First and foremost, you need to open the cover of the scanner.

2.      On the left side of the scanner cover help, you will see the corners on both the right and left sides.

3.      You need to check if any paper scrap or any other foreign object is lying inside the printer.

4.      Clean up any jam that you notice inside the printer.

5.      Make sure that the printer head moves without any obstructions.

6.      To check it, you will have to move it by using your hands.

7.      Keep in mind that the dust may cause several problems to your HP printer.

8.      Clean the dust on the HP printer.

9.      Press and hold the Cancel button for 5 seconds before the printhead is in the middle position.

10.  Check for any scrap of paper and remove it.

11.  Now, you need to open the cover of Jam clear and take a look inside the printer.

12.  If there is any jammed paper, take it out gently.

13.  Make sure that it is not ripped when you pull it out.

14.  When all the steps are complete, switch to the Control Panel that appears at the bottom of the HP printer.

15.  Choose the option that reads “Improve Quality Print.”

16.  Do as you wish by pressing the DOWN and UP arrow keys.

17.  Click the Start button now.

18.  The process will start and take a few minutes to complete.

19.  Check if the error code E9 is fixed now.

Solution 2

We have already mentioned that the error E9 is also caused owing to the issue with the ink cartridges on a printer. Fix the error E9 on your HP printer by following the instructions mentioned below:

1.      Turn off the HP printer, detach the power cords and place it in a secure place.

2.      After that, you need to open the cover that encloses the cartridges.

3.      Use both your hands and pull the cover gently.

4.      After opening the cover, take out the ink cartridges and see if the cartridges have sufficient ink.

5.      If you have installed the third-party cartridges, replace them with the branded ones.

6.      Doing the process will help you get rid of the error code E9 on your HP printer.

Note: If you are not tech-savvy and don’t know much about printers, avoid taking risks and contact a printer expert to fix the error.

Conclusion

In the article, we have shared the methods to fix the HP printer error code E9. By following the step-by-step procedure mentioned above, anyone can get rid of it easily. We hope the solutions are helpful to you.

Goku smith and I’m a Printer Operator for 8 years. I live in USA Though many companies manufacture printers, in my experience, HP printers are the best.Visit the website 123.hp.com/setup

 

 

 

SOURCE: Fix HP Printer Error Code E9

Facing HP Printer Error 35? Fix It Now

Are you facing error code 35 on your HP printer? Have you become tired of searching for the perfect methods to fix it? If your answer to the question is yes, your search has brought you to the right destination. We have discussed major reasons for error code 35 and the effective methods to sort it out. Before one tries to eliminate this error code, one first needs to know why error 35 occurs on an HP printer. Let’s get started.

Why does an HP Printer Display the Error Code 35?

The error code 35 is common, so it may appear on any HP printer model. Your Brother printer will stop printing documents in case the error code 35 appears. The sudden appearance of the error code 35 may annoy any printer user. We have given quick and simple methods to bypass the HP printer error code 35. Read below.

Methods to Bypass HP Printer Error Code 35

Anyone can eliminate error code 35 with the help of the steps mentioned in the article. Take a look at the solutions below.

Solution 1

To get rid of the error code 35 on your HP printer, you need to follow the instructions below:

1.      The first you need to do is update Windows.

2.      If the error code appears due to the operating system, the error will disappear as you update the Windows.

3.      Make sure that your PC has the latest version of Windows.

4.      Click the Start button.

5.      Go to the Configuration.

6.      Now, you need to go to the Windows Update option in the Settings section.

7.      When you see the Update Check option, click the same option.

8.      Windows will start looking for the latest version.

9.      As the latest version is detected, the download will begin.

10.  Go to the alternative Shut Down option.

11.  Update and shut down.

12.  Restart your PC so that the applied changes take place.

13.  Print a page to verify if the error code 35 is fixed.

Solution 2

In rare cases, the basic reason behind the occurrence of error code 35 is the obsolete drivers. If your HP printer drivers have become outdated, you need to update the printer drivers. We have given the complete process to update the drivers for your HP printer. Follow the steps:

1.      First of all, you need to press the Windows key + R on your keyboard.

2.      When the process is complete, you will see a Run dialog box on your printer’s screen.

3.      In the same box, you need to type service. msc and click the Enter key on the keyboard.

4.      When you reach the service window, search for the printer spooler.

5.      Click the Start button.

6.      When it starts, you need to right-click and select the Restart option.

7.      The procedure mentioned above will make the error 35 disappear on your HP printer.

Solution 3

When the settings you made are not correct may cause error 35. By resetting an HP printer, one can get rid of several annoying printer issues. We have explained the detailed procedure to restore an HP printer to factory defaults. Follow the instructions in the same way as explained below:

1.      You need to check the HP printer model as every HP printer model differs in terms of features.

2.      Look at the screen of your HP printer.

3.      If you see the Setup option, click the same.

4.      As you click the button, you will see the Tools button.

5.      After clicking on the Tools button, you need to click on the Restore Factory Defaults option.

6.      Finally, click Yes.

7.      Your HP printer will now restart.

8.      The printer has been reset to default settings.

9.      It will fix the error code 35 on your HP printer.

Solution 4

If performing the reset process does not make the error code 35 disappear, you can perform the hard reset on your HP printer and get rid of various printer problems, including the one mentioned in the article. Follow the instructions explained below:

1.      First of all, make sure that your HP printer is turned on.

2.      Open your printer and take the ink cartridges out of the printer.

3.      Detach all the power cables from the main power supply.

4.      Apart from this, remove the USB cables too.

5.      Keep the HP printer in the same way for at least 20 minutes.

6.      Reconnect the power cables and USB cable to the HP printer.

7.      Reinstall the ink cartridges and click them appropriately.

8.      Now, you need to switch on your HP printer.

9.      Print a page and see if the error code is resolved.

Note: If the error still appears and seems difficult to resolve, you should contact HP printer experts instead of taking risks.

Conclusion

HP printer error code 35 is common and may appear anytime. The solutions mentioned in the article will help you get rid of the error. We hope you find these solutions of great help to you.

James Smith and I’m a Printer Operator for 8 years. I live in the USA Though many companies manufacture printers, in my experience, HP printers are the best. Visit the website 123.hp.com/setup

 

 

 

SOURCE: Facing HP Printer Error 35? Fix It Now